• Regulatory NewsRegulatory News

    Continuous manufacturing applicants saw quicker approvals, higher revenue than batch applicants

    Applicants that used continuous manufacturing (CM) technology to bring their products to market waited less time before approval after submission compared to batch manufacturing products, according to results from a US Food and Drug Administration (FDA) audit published in the International Journal of Pharmaceuticals .   Authors from the FDA Center for Drug Evaluation and Research (CDER) said these manufacturers had a potential estimated increase in revenue due to the ...
  • Regulatory NewsRegulatory News

    FDA tells Dutch API producer to clean up its equipment act

    A Dutch producer of active pharmaceutical ingredients (APIs) was put on notice to adopt more robust equipment cleaning practices and use better safeguards to prevent cross-contamination in a warning letter from the US Food and Drug Administration (FDA) dated 14 June. FDA found the presence of “visible powder residue” on non-dedicated equipment.   The warning letter pertained to Fagron Group B.V.’s manufacturing site in Saint Paul, MN. The company is headquartered in ...
  • RF Quarterly

    Evolution of the Japanese regulatory system and agencies

    The Japanese regulatory system has been recognized as one of the most sophisticated and stringent regulatory systems in the world. The regulatory policies are developed and administered by the Ministry of Health, Labour and Welfare (MHLW), the Pharmaceuticals and Medical Devices Agency (PMDA) executes the policies, and certain authorities are delegated to local governments. Over the last 6 decades, the Japanese regulator has faced many challenges but has kept enhancing the...
  • Regulatory NewsRegulatory News

    Pharmaceutical groups want more clarity on continuous manufacturing guideline

    Several industry trade associations are asking for more clarity on the International Council for Harmonisation’s (ICH) Q13 guideline on continuous manufacturing, including what constitutes a state of control for a continuous manufacturing process, the scope of the guideline, and the definition of a batch size. One manufacturer said the guideline places too much emphasis on non-conforming material, which has not been a significant issue in continuous manufacturing.   Th...
  • Feature ArticlesFeature Articles

    October’s Regulatory Focus: Linguistic review, advanced therapies in Asia-Pacific, and more

    Feature articles during October included an in-depth look at the linguistic review process in Europe and  reviews of the regulatory pathways for herbal medicinal products, medical devices, and supplements in the EU and for advanced therapies in the Asian-Pacific region. Also included was an article on the challenges of data integrity remediation in cGMP facilities.   Linguistic review and herbal product regulation The linguistic review process for centrally authori...
  • Feature ArticlesFeature Articles

    Data integrity remediation and cGMP facilities

    Data integrity remediation is a critical activity performed by analytical laboratories, quality control laboratories, and manufacturing plants to comply with good manufacturing practice (GMP) and data integrity requirements. There are various challenges during this activity, and current GMP (cGMP) facilities struggle to comply due to technical limitations and resource constraints. This article examines the data integrity remediation challenges faced by cGMP facilities and ...
  • Regulatory NewsRegulatory News

    FDA officials tout progress and achievements in advanced manufacturing

    The US Food and Drug Administration’s (FDA’S) efforts to encourage the industry’s adoption of advanced manufacturing is bearing fruit, according to a new update from the agency, noting robust interest from industry in participating in the agency’s Emerging Technologies Program (ETP).   In addition, “significant funding” from Congress has helped fund more research in advanced manufacturing, wrote Michael Kopcha, director of the Office of Pharmaceutical Quality in the FD...
  • Regulatory NewsRegulatory News

    FDA fleshes out models for safe continuous manufacture of therapeutic proteins

    The US Food and Drug Administration (FDA) has issued a new paper  to help shed light on how therapeutic proteins can be produced safely on a continuous manufacturing line.   Continuous manufacturing “is still a novel concept for therapeutic proteins” and more “tangible” examples are needed to implement the program, acknowledged FDA in the report. Further, there are “few published studies” addressing viral inactivation methods for these products.   However, it’s im...
  • Regulatory NewsRegulatory News

    ICH releases widely anticipated guidance on continuous manufacturing

    The International Council for Harmonisation (ICH) on Tuesday issued its Q13 guideline on continuous manufacturing, making a draft available for public comment.   The long-awaited draft was soon expected, according to an FDA official who gave an update on the status of the guideline at a 14 July CMC Strategy Forum sponsored by the California Separation Science Society (CASSS). (RELATED: Long-awaited ICH continuous manufacturing guideline coming soon , Regulatory Foc...
  • Regulatory NewsRegulatory News

    Long-awaited ICH continuous manufacturing guideline coming soon

    The International Council for Harmonization (ICH) Q13 guideline on continuous manufacturing is expected to be released for public comment soon, as the US pharmaceutical industry continues slow but steady adoption of this mode of manufacturing.   Cyrus Agarabi, a reviewer in FDA’s Office of Biotechnology Products in the Office of Pharmaceutical Quality, updated attendees on the status of the ICH Q13 guideline at the 14 July CMC Strategy Forum sponsored by the California...
  • Regulatory NewsRegulatory News

    EMA guidelines highlight changes to IMPs triggering notification to regulators

    The European Medicines Agency (EMA) on 1 July released for public consultation two draft guidelines to help sponsors of investigational medicinal products (IMPs) for new drugs and biologics decide whether manufacturing changes are considered a “substantial modification” needing prior approval.   These guidelines are connected to the EU regulation No. 536/2014 which came into force on 20 June 2014. The regulation defines a “substantial modification” as any change to a...
  • RoundupsRoundups

    Euro Roundup: EDQM says remote inspections could be third pillar for GMP oversight

    Real-time remote inspections piloted during the COVID-19 pandemic could serve as a third pillar for the supervision of active pharmaceutical ingredient (API) manufacturers, the European Directorate for the Quality of Medicines (EDQM) said.   EDQM began piloting real-time remote inspections, which it refers to by the abbreviation RTEMIS, in 2020 in response to travel restrictions. With the vast majority of the around 40 on-site inspections EDQM performs each year happen...