• Regulatory NewsRegulatory News

    Budget law calls for BARDA and FDA to establish “warm base” manufacturing to better prepare for future pandemics

    The federal budget law passed by Congress and signed by the president in late December calls on federal authorities to establish “warm base” domestic manufacturing to respond quickly to demand surges for medical products during a public health emergency.   Section 2401 of the law calls on the Biomedical Advanced Research and Development Authority (BARDA) to work with the US Food and Drug Administration (FDA) to coordinate these efforts.   The law amends Section 319...
  • Regulatory NewsRegulatory News

    FDA cites Sun Pharma with litany of GMP violations, including poor aseptic practices

    The US Food and Drug Administration (FDA) admonished Sun Pharmaceutical Industries in a recent warning letter for a several good manufacturing practice (GMP) violations, including poor aseptic practices, inadequate cleanroom design and environmental monitoring and failure to keep manufacturing equipment clean.   These violations prompted FDA to place the firm on import alert on 7 December.   FDA inspected the firm’s Gujarat India facility from 26 April to 9 May 202...
  • Regulatory NewsRegulatory News

    Omnibus brings new advanced manufacturing programs to FDA

    The recently enacted ominous spending bill approved by Congress in late December directs the US Food and Drug Administration (FDA) to establish advanced manufacturing centers for excellence and an advanced manufacturing technologies designation program.   The omnibus spending bill was signed by President Biden on 27 December and authorizes $3.5 billion in budget authority for the US Food and Drug Administration (FDA) in FY 2023, a 6.5% increase compared to its 2022 bud...
  • Regulatory NewsRegulatory News

    ICH touts adoption of continuous manufacturing, safety reporting guidelines

    The International Council for Harmonisation (ICH) announced that “excellent progress” has been made over the past year in advancing guidelines in the areas of pharmaceutical quality, safety and efficacy, including the adoption of the widely awaited guideline on continuous manufacturing (CM).   These achievements were announced on 22 November following its meeting held in Inchon, South Korea. The meeting was held in parallel with meetings of ICH’s ten working groups and...
  • Regulatory NewsRegulatory News

    FDA official offers insights on Emerging Technology Program

    The US Food and Drug Administration (FDA) accepts a wide variety of applications into its Emerging Technologies Program (ETP), and is not just focused on continuous manufacturing, said Joel Welch, associate director for science and biosimilar strategy in the agency’s Office of Biotechnology Products.   “I think that sometimes there is a misperception that advanced manufacturing is just about continuous manufacturing,” said Welch who provided an update on the ETP at the...
  • RF Quarterly

    CMC regulatory strategy

    Regulators make benefit-risk decisions based on the three pillars of quality, safety, and efficacy. CMC is applied throughout the product development spectrum from the initial synthesis of a molecule to reach a hypothetical target, to commercial scale up and beyond. This article helps the reader navigate the CMC regulatory landscape and understand the multiple considerations needed in order to devise a strategy which is efficient with respect to cost and time to approval. ...
  • Regulatory NewsRegulatory News

    OPQ’s FY2021 report gives mixed review on state of drug quality

    The US Food and Drug Administration’s (FDA) Office of Pharmaceutical Quality (OPQ) lists both negative and positive trends in its new report assessing the state of pharmaceutical quality in FY2021. Among the setbacks are the increasing number of drug recalls, under-reporting of quality issues in field alert reports (FARs) and a growing number of products failing sampling tests.   On the bright side, OPQ said its New Inspection Protocol Project (NIPP) program has increa...
  • Regulatory NewsRegulatory News

    EU issues long-awaited GMP Annex 1 revision

    The EU’s eagerly anticipated revision of its good manufacturing practice (GMP) Annex 1 for sterile drug products was released on Thursday after 14 years of development. The revised requirements, which are set to take effect 25 August 2023, govern the manufacturing of sterile drugs made in the EU, as well as imported products.   The revised Annex comes after hints earlier this year that it be out in mid-2022. (RELATED: EU GMP Annex 1 revision to be released mid-year ...
  • Regulatory NewsRegulatory News

    Continuous manufacturing applicants saw quicker approvals, higher revenue than batch applicants

    Applicants that used continuous manufacturing (CM) technology to bring their products to market waited less time before approval after submission compared to batch manufacturing products, according to results from a US Food and Drug Administration (FDA) audit published in the International Journal of Pharmaceuticals .   Authors from the FDA Center for Drug Evaluation and Research (CDER) said these manufacturers had a potential estimated increase in revenue due to the ...
  • TrackersTrackers

    COVID-19 therapeutics tracker

    A handful of therapeutics have been approved specifically to treat COVID-19, reduce its severity, or prevent it entirely.   As of July 2022, those treatments include dexamethasone, Avigan (favilavir), Veklury (remdesivir) alone and in combination with Olumiant (baricitinib), Lagevrio (molnupiravir), Xevudy (sotrovimab), Regkirona (regdanvimab), Ronapreve (casirivimab and imdevimab), amubarvimab and romlusevimab (formerly BRII-196 and BRII-198), Actemra/RoActemra (tocil...
  • RF Quarterly

    Evolution of the Japanese regulatory system and agencies

    The Japanese regulatory system has been recognized as one of the most sophisticated and stringent regulatory systems in the world. The regulatory policies are developed and administered by the Ministry of Health, Labour and Welfare (MHLW), the Pharmaceuticals and Medical Devices Agency (PMDA) executes the policies, and certain authorities are delegated to local governments. Over the last 6 decades, the Japanese regulator has faced many challenges but has kept enhancing the...
  • Regulatory NewsRegulatory News

    Pharmaceutical groups want more clarity on continuous manufacturing guideline

    Several industry trade associations are asking for more clarity on the International Council for Harmonisation’s (ICH) Q13 guideline on continuous manufacturing, including what constitutes a state of control for a continuous manufacturing process, the scope of the guideline, and the definition of a batch size. One manufacturer said the guideline places too much emphasis on non-conforming material, which has not been a significant issue in continuous manufacturing.   Th...